How to Remove Window Tint

Preparing things for the job of how to remove window tint on a car, especially if you are doing it on your own. For this particular job, you’re going to want the following things: a normal glass cleaner. Some paper towels or soft pieces of rags to massage the windows. A razor blade and razor tip.

Step by step

The first step is preparation. You will need to prepare the glass before you even attempt to do this job. You can clean it with some glass cleaner and a soft rag, but you may need to buy some chemical peel that can be found at any home supply center. This chemical peels the film away from the glass without causing any damage to it.

The second step is the next. You will need to scrape off the tint by using a razor blade. The best way to do this is to use the side of a credit card and make a small incision. This will allow you to reach in deep enough to get the tint. Once you have reached in deep enough, scrape the window cleaner in one sweeping motion. You don’t want to scrape it too much, just enough to give you access to the glue that holds it in place.

For the third step, you will need to gather up some of your supplies. You will need some heavy-duty tape, scissors, a glass cleaner, and heat. The heat works well for getting into small cracks or crevices. And the scissors can be used for cutting holes in the tint so you can remove it without any damage to the windows.

The fourth step is to gather up the fabric steamer, paper towel, glass cleaner, and window cleaner. You should have everything you need, except for the heat. The fabric steamer and a paper towel will help you to clean any residue from the adhesive that may remain on the fabric before you steam it off.

For the fifth step, you will need to put the hot steam over your stained windows and then get rid of the residue with the fabric cleaner. If there are no stains, then all you need to do is to get rid of the residue left behind by the cleaning agent. After this step, you can continue to the sixth step, which is to rinse the windows with water. Make sure that you do not leave any soap residue on the windows. Then, let them dry completely.

For the seventh step, take out the window blinds. Then, you can go ahead and remove the tint with the glass cleaner or heat gun. This step is important if the tint is made of plastic film. However, if it is made of some other material, a heat gun will be useless. Just use the glass cleaner on the film and get rid of the residue easily.

For the last step, you just need to wipe the film off the windows with a wet cloth, especially when there are very heavy or large particles that are blocking the UV rays. The cloth will also help you get rid of the film that has accumulated over time. The fact is that the heat is responsible for the removal of the film from the surface. So, do not forget to apply heat treatment before the application of the film.

How to update glass tint?

If you follow the previous steps, then the process of removing the window tint should be quite simple for you. The first thing you have to do is to clean the room.

You have to make sure that the place where you are going to apply this solution is completely clean. Then, you can start defroster the unit. This will help to make the adhesive bond stronger.

The process of removing this type of window tint is quite similar to removing the frosted glass. For the first step, you have to apply heat treatment. Then, you can use a UV rays diffuser at the same time. When you combine both ingredients, you will be able to remove the tint easily.

Conclusion

There is no doubt that the process of removing this tint is difficult. But, you need to keep in mind that this problem can easily be solved if you take the right products. If you want to know more about UV rays and their effects on car window film, you can visit some online sites. If you really want to save money, you can visit some stores. These stores usually offer free removal of window film.